Thread: Feeler: B13 rear lateral link arms adjustable

As you all know we have Happy's car in the shop. One of the upgrades we are looking into are the four lateral link arms that are used in the rear suspension.
We need to see if there is an interest in larger diameter and solid units. These will allow for the adjustment for rear camber.

Currently we are thinking of two options:
1. Poly lateral link arms
2. Solid joint link arms

These will be a must have with our offset rear pillow mount for wider tires.

Any thoughts, as always we need 5 to go.

1. Happynole
2.
3.
4.
5.

How will these arms be superior to the ingalls pieces?

38150-38170 - SmartArm Adjustable Link, Camber/Toe - Ingalls Engineering Co., Inc.

+1.

How many more/less *of camber can we adjust. How thick is "thick". And what is the approx cost for each, poly and solid.

On that site, it says order 1 per wheel. Wouldn't you need 4 for each side in the back??

Thats a good question.

depending on price and if they will work with my ksport coilovers i am down.

We will have Happy's suspension apart on Monday. Ill update then. My prices will be much more competitive.
I will take approximate measurements to translate camber adjustment gains.
I can make the bars as thick as possible obviously ... hollow ... solid ... aluminum ... dom tubing ... lots to look at.

Let me know!