Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: B13 / B14 solid rear strut mounts

+ Reply To Thread
Posts: 51-60 of 63
2009-02-23 04:20:43
#51
Originally Posted by bluebomber
No problem, whenever you can. Im just curious


Many people are!
2009-02-25 15:43:32
#52
Update!! got the isolators but still waiting on the bumpstops!!

2009-02-25 17:11:40
#53
Originally Posted by bluebomber
Update!! got the isolators but still waiting on the bumpstops!!


You may need more washer or more bushings when you go to assemble it. Just FYI!
2009-03-16 02:52:52
#54
Originally Posted by Shawn
In general, anything that can be done to maintain the 3" of OEM travel is good.

That is why we (the forum) are so enamored with CSK struts. Custom Shortened Koni struts, made by cutting down an OEM strut body, and then utilizing the correct Koni insert. Allowing full suspension travel with aftermarket springs (Hyperco, Road Magnet, etc...) that allow for a minimal (> or equal to a 1-inch) drop on the vehicle.

That's all I've got, but I would love to hear from some more mechanically astute folks.



What if I was to add an inch to the mounting position?? It may require a longer strut but it would add two + inches of travel, giving about 3.5 -4 in of travel.
2009-03-31 22:13:06
#55
New one piece design

Starting at $99

2009-04-02 17:58:03
#56
has anyone used the rear tein pillow ball mounts
2009-04-02 20:00:52
#57
I believe there is one guy using them but they are for a co setup only. There is no ring for a spring.
2009-04-02 20:18:54
#58
Those look awesome. Your site list's stuff for a G20 but in the drop down menu there is no mention of G20s anywhere. This is going off about a week ago when I looked at it. Haven't checked lately but wanted to give you an FYI on that.

Did you try these out on a G yet?
2009-04-02 20:21:47
#59
?? Are you taking about these mounts not being in the drop down?

Im still looking for a volunteer to try out the rear mounts for the G. I can do $75 shipped on the prototype set (P11 non independent) or $100 shipped on the prototype set (P10 rear independent) if you are interested. I also need someone for the B13 but it will be more due to the spherical bearing.
2009-04-02 22:15:41
#60
Originally Posted by bluebomber
?? Are you taking about these mounts not being in the drop down?

Im still looking for a volunteer to try out the rear mounts for the G. I can do $75 shipped on the prototype set (P11 non independent) or $100 shipped on the prototype set (P10 rear independent) if you are interested. I also need someone for the B13 but it will be more due to the spherical bearing.


On your website, I looked and in that drop down menu, where you select what car and what type of product you want, the G wasn't listed. At least it wasnt a week ago. If you have updated since then or are waiting on a final fitment which is what it sounds like, I understand then
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top