Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: B13 with Progress rear sway, twitchy. Advice.

+ Reply To Thread
Posts: 31-34 of 34
2010-01-27 02:39:19
#31
Originally Posted by superblackz
Did you get a chance to check your spring rates? That would be a big help. Yes you can easily get a light rear end and yes you can get snap oversteer, but for so many reasons from rapid throttle lift to under-spec front spring rates, alignment, sway, brake balance and braking modulation, it's a very long list. Just remember that chassis stiffening measures are first priority like a good LCA brace up front and the rear RTSB was a big help on my car.

Besides some lousy driving on cold tires, this is a great example of pushing the balance of the car way outside reasonable limits, those are 350 lbs-in springs buried up front. I run 450's today, but honestly here it's the recovery from a spin and ham-fisting the slalom that followed. Came back at it at way too sharp of an angle because it was a long course and was either going to make the gate or take down the cone so I wouldn't get the OC...fast course, too. I made a lot of changes in 2009 and the car is much better for the track or autocross than it was here on a cold CT March day...



thats so sick steve.. reminds me of knight rider!
2010-01-27 03:56:55
#32
You better not leave any XS' laying around at the convention. They'll walk away, into my trunk!
2010-01-27 05:17:08
#33
so are the Cusco camber plates the only ones that work with OE diameter springs??
2010-01-27 06:34:21
#34
Originally Posted by vqman
so are the Cusco camber plates the only ones that work with OE diameter springs??


Are there different Cusco camber plates? The set my parents had only worked with ground control sized springs.

I think OEM makes camber plates that will work with regular lowering springs. There is an option when you look at the page for them to choose what style you want.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top