Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Wheel Fitment Thread

+ Reply To Thread
Posts: 1-6 of 6
2007-12-16 07:55:38
#1
Wheel Fitment Thread
I snatched this thread from another forum, however I think its a great idea, especially for us 240 guys to know what fits and what doesn't. Quoted from Yokota180sx:

Post your vehicle from as many helpful angles (limit to 4 pictures please) Front, side, and looking down the side of your car from the rear and front.

Post the following information in this format, using a / to seperate Front / Rear.

- Wheel Brand
- Diameter (16/17/18)
- Width
- Offsets
- Does it clear z brakes and coilovers (if you dont have Z brakes don't answer unless you know for a fact)
- Suspension modifications/coilovers/springs and struts (not sway bars, not stiffening, im talking arms that were REQUIRED to get your setup to work because of camber/toe problems etc etc)
- Are there any fender modifications? if so what?
- Tire Sizes
- Any other relevant info

Guys, please keep idle chat, out of this thread, it's NOT for discussing setups or asking questions.

Also, please post ALL the required information or your post will be deleted!

Take the 5 minutes and do this right, it will help everyone in the long run!!
2007-12-16 07:56:44
#2
1989 Nissan 240sx Coupe

Sportmax 501
16X8 +15 front and rear
Megan Track Series Coilovers w/ camberplates
No other suspension mods
Dunlop Direzza 195/50/16
Front and rear fenders are both rolled
Clears coilovers fine, no rubbing either
Don't know if it will clear Z brakes











2007-12-16 17:07:18
#3
All of the following is the same, front and rear
Kosei K1
16x8.5 +27
245/45-16 Hankook Ventus Z212
KYB AGX's and Tein S-techs (thus no lowering)
No fender modifications

I have no clearance issues or rubbing under hard track use, despite the tire being relatively close to the strut body. Another important thing to note is that the car probably sits higher than Tein intended because it's had 500-ish pounds taken out. This aids the clearance, and it probably wouldn't clear if it was lowered (w/o some fender modification).




2007-12-16 19:13:56
#4
As long as this thread doesn't deteriorate into a Zilvia-style wheel whore thread, I'll let it stay here I've always been happy with the way us FWD-to-RWD guys haven't sacrificed ourselves on the altar of wheel fitment and flushness.

Kosei K1 (too bad you can't get 'em any more) 16x7.5, +32

Considering 17x8 +32, should fit fine as well. That's right, you heard it here first folks, Rittmeister is considering 17 inch wheels. Really depends on the seller though...



2007-12-16 19:15:56
#5
Originally Posted by Rittmeister
As long as this thread doesn't deteriorate into a Zilvia-style wheel whore thread, I'll let it stay here


Threads like this have helped me alot, so I think that instead of removing the thread altogether, just delete individual posts.
2007-12-20 10:18:59
#6
stock 16'' +42 se s14 wheels with fit z32 brake conversion just fine. works for me no clerance issues,
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top