Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: "THE" what do you have left to do before SR2014 Ohio? Thread

+ Reply To Thread
Posts: 81-90 of 112
2014-06-03 17:59:04
#81
Finally bit the bullet and having the front windshield replaced. Found some rust under the glass so I'm gonna have some rust prevention work done so the glue has a clean surface to adhere to and prevent future rust from returning
Last edited by LOUROK on 2014-06-03 at 18-01-55.
2014-06-03 18:17:53
#82
Nice! Perfect time to tint it...
2014-06-03 18:46:18
#83
Originally Posted by LOUROK
Finally bit the bullet and having the front windshield replaced. Found some rust under the glass so I'm gonna have some rust prevention work done so the glue has a clean surface to adhere to and prevent future rust from returning


Nice. New windshields make cars feel new again. Wait until you drive it for the first time....
Last edited by hammerin hank on 2014-06-03 at 18-47-37.
2014-06-04 04:29:11
#84
Mess with ECU and distributor, rotate tires, get my gauges working fully. that's about it. oh and wash the damn thing.
2014-06-04 05:30:09
#85
Originally Posted by vqman
Time is running out, about 6 weeks left..

Here is what I have left:
350z titanium pedal install
strut housing replacement, front passenger side
power steering/steering overhaul
trunk leak - rear window replacement?
road magnet springs -or- cut front hypercoils
iacv back into system
air conditioning/hvac switches
front sway bar bushings -or- traction bar/sway hybrid
rust removal
new front driver side quarter panel
touch up paint
ground effects (B14 SE side skirts)
paint
control arm and chassis bushings
new stereo system (almost done)
short shifter offset mod
AD22 brake caliper rebuild/paint black or powder coat
tune by some ass hats in Connecticut

Here's a list of stuff that i've done or had a friend or shop do to my car, since October
300ZX shifter install
new coolant overflow install
paint valve cover
A-pillar gauge pod install
a/f gauge relocate to pod
new window crank install
coolant leak
speed sensor
B15 transmission install
powder coat GTiR NISMO wheels
put on the 205/50/15 RE-11’s
set timing
replace front left wheel bearing
ASP header install - exhaust shop for 2.5" to 3" flange
transmission drain and fill plug replacement
throw out bearing reseat/replace
clutch cable install
4 wire o2 sensor install
way bar bushings
wideband o2 sensor purchase/install
rear squeak diagnose/repair
N1 cam/springs/retainers
Intake Manifold
Base tune for N1 cams, 9000 rpm, Cobra TPS, N60 MAF
remove 2.5" exhaust and get 3" stainless setup
dent removal (as good as it gets)



so far, the only things i've moved from "to do" to the "done" list:

remove 2.5" exhaust and get 3" stainless setup
dent removal (as good as it gets)
2014-06-04 05:32:24
#86
LOL @ "rust removal" in the next 14 days. lol
2014-06-04 05:34:58
#87
yeah, that's not happening.. the shop that was going to do it was hit by a microburst a few weeks ago.. it was more like a macro-burst.. 100 mph winds over a huge area... the roof was torn off the place..
2014-06-04 05:47:38
#88
Ah shit, my bad. sorry to hear
2014-06-05 09:07:57
#89
Setup wastegate for lower boost
change plugs, do oil change
change seat rails on driver seat
2 DD tires
Last edited by unijabnx2000 on 2014-06-06 at 06-41-43.
2014-06-05 14:40:12
#90
poop
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top