Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Convention Build Status

+ Reply To Thread
Posts: 371-380 of 461
2012-05-22 23:59:26
#371
motor is ready to go in. upgraded my rear trans mount bolts to 17mm for those hard launches and I will be ready to have some fun on the highway
2012-05-23 00:25:13
#372
Ughh wheel hop with the stock motor mounts still in, that will change next week
2012-05-23 02:20:20
#373
Originally Posted by SR20GTi-R
Still trying hard to get the car there.

Thanks to the guys, all the doors, fenders and glass is back in. Still missing the new header, injectors and suspension. Still have a bunch of wiring to do.

Hurt my back pretty bad last night so I am taking the night off and hopefully getting back at it tomorrow. Its going to be a long shot but I am still pushing.


Call me asap
2012-05-23 06:52:55
#374
Originally Posted by nismo94tuner
Break in period is almost done. Might take a trip to Jersey or CT to get some more mileage in. In the meantime, I have to fix something.



Fat hose on the waterneck. Such a slut.


not going with the "break it in on the dyno" theory, huh?
2012-05-23 07:57:44
#375
Originally Posted by nismo94tuner
Break in period is almost done. Might take a trip to Jersey or CT to get some more mileage in. In the meantime, I have to fix something.



Fat hose on the waterneck. Such a slut.


That VC needs Jesus
2012-05-23 13:42:45
#376
Originally Posted by SE-Rican
Best B14^^^^^^. I am calling it now!


He's gonna have a battle for that!!! lol

Originally Posted by SR20GTi-R
Still trying hard to get the car there.

Thanks to the guys, all the doors, fenders and glass is back in. Still missing the new header, injectors and suspension. Still have a bunch of wiring to do.

Hurt my back pretty bad last night so I am taking the night off and hopefully getting back at it tomorrow. Its going to be a long shot but I am still pushing.


This guy didnt take the night off. Dont let him fool u, he's trying everything crippled and all.


Originally Posted by nismo94tuner
Break in period is almost done. Might take a trip to Jersey or CT to get some more mileage in. In the meantime, I have to fix something.



Fat hose on the waterneck. Such a slut.


That thing is a whore! I hate that bitch, boombatz that hose

Originally Posted by ashtonsser
My build is alive. Woo hoo. Dyno tuning on Thursday


I cant wait to see it!! Good to hear its on schedule!

Originally Posted by ny5speed
Haha... almost... that was just one round of rubbing compound, still needs a polishing compound and wax. I really hate detailing lol.


Chico Shine everything!!
Originally Posted by SE-Rican
That VC needs Jesus


I think Jesus took the day off with that Valve cover lol


I am almost ready with the smurf The juice is almost fully installed and then it needs a tune!!! Injectors are coming back today from the cleaners and it'll be ready to party!
2012-05-23 15:55:38
#377
Bes,

Did you use that red high temp paint from autozone? If so they always seem to peel unless you properly cure or coat the thing with several coats of high temp clear.

The paint i used on mine is actually bronze wheel paint and then about 3 coats of high temp clear. So far so good
2012-05-23 19:29:46
#378
Na, thats my very first VE valve cover. Its actually a wrinkle red. It finally started chipping up over the years. Its broken near the front where the hole is for a bolt so I didn't bother painting it. Trying to get my hands on a new one.

Found out the reason why I had a leak when the car idled for too long:



Worked out since my o-rings leaked on my oil filter housing so new ones are going on as well as a new oil pressure gauge.

Got a new hose on. Gotta put my IM back on and drive the bitch around. Been busy with class so maybe I can get some time later to bolt it back together once I finish up some paperwork.
2012-05-23 19:47:18
#379
Well this is a first on a race car... Anyone care to guess what it is?

2012-05-23 19:58:11
#380
Electric power steering?

edit: 00-05 MRS pump! i was going to do the same thing!
Last edited by Keo on 2012-05-23 at 21-44-06.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top