Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 200sx SE-R Factory Alarm and Keyless Entry

+ Reply To Thread
Posts: 11-18 of 18
2012-10-20 05:49:24
#11
Originally Posted by danfiveten
1. Enter vehicle, close and lock all doors using power lock switch on drivers door.

2. Insert and remove (do not turn) key from ignition at least 6 times within 10 seconds.
Tail lamps will flash to indicate original code has been erased.

3. Insert and turn key to ACC position.

4. Press LOCK on first keyless remote. Tail lamps will flash to confirm programming.

5. To add additional remotes, unlock then lock the doors using power lock
switch on drivers door.

6. Press LOCK button on second keyless remote. Tail lamps will flash to confirm
programming.

7. Open drivers door, turn ignition to OFF..

Mine doesn't flash and i tried it multiple times
2012-10-20 06:04:17
#12
It will flash, reason why your most likely having issues is the ignition / key if its not the stuck key. Spray some wd40 in the ignition, and key in and move it around. What there is in there is a lil piece that moves in there to detect the key going in and out,, sometimes you have to jiggle it as your putting it in and out. My se-l was having that issue.
2012-10-20 07:00:29
#13
Does your security light on the dash flash when the car is off?
2012-10-20 07:31:49
#14
Originally Posted by danfiveten
It will flash, reason why your most likely having issues is the ignition / key if its not the stuck key. Spray some wd40 in the ignition, and key in and move it around. What there is in there is a lil piece that moves in there to detect the key going in and out,, sometimes you have to jiggle it as your putting it in and out. My se-l was having that issue.


Yup i dont have the stock key
2012-10-20 16:53:15
#15
Mine flashes. Try jiggling the key as you go in and out.
2014-07-24 06:38:40
#16
i needed this info for my new key fobs
2014-10-07 21:03:02
#17
doesn't this work with only certain key fobs? like don't u have to have a certain key fob for the keyless to work?
2014-10-09 01:22:01
#18
@denovr6 where did you get your fobs from?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top