Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 50/50 tail lights on a 200sx??

+ Reply To Thread
Posts: 31-40 of 54
2011-11-09 04:23:09
#31
I'm going to give it a shot this weekend. I'll let you know how it turns out.
2011-11-09 06:48:14
#32
^^^^^ I'm doing it tommorrow
2011-11-09 07:10:37
#33
Originally Posted by NightStalker
I'm going to give it a shot this weekend. I'll let you know how it turns out.


Originally Posted by 96b14se-r
^^^^^ I'm doing it tommorrow


Let me know how it goes, and if they come out good, i'll send mine to you and pay you lol good luck
2011-11-10 01:54:17
#34
Yea it's not like the maxima tails u have to cut the yellow out and some how glue the clear on to it
2011-11-12 17:25:51
#35
As far as the led's go, I'm going to try to make something like this.


Also, I kind of like the way the marker and brake is setup like here:

http://forums.maxima.org/4th-generation-maxima-1995-1999/563126-new-led-tail-lights.html
Last edited by NightStalker on 2011-11-12 at 17-32-26.
2011-11-13 01:11:26
#36
Got the lenses off the housings today. That was fun. I got plenty of red, amber, and white led's. Also got plenty of resistors and stuff .Just need to get some boards now. I was thinking of making a sequential pattern in the turn signals, but I'll have to read up on how to wire that up first.

I think at some point, I'll start a thread to show my progress.
2011-11-13 01:15:23
#37
Make the turn signals like the newer Mustangs, flashes from inner to outer.
2011-11-13 01:18:34
#38
Originally Posted by NightStalker
Got the lenses off the housings today. That was fun. I got plenty of red, amber, and white led's. Also got plenty of resistors and stuff .Just need to get some boards now. I was thinking of making a sequential pattern in the turn signals, but I'll have to read up on how to wire that up first.

I think at some point, I'll start a thread to show my progress.


wow sounds awesome hurry up and figure this out for i want a set done
2011-11-13 04:18:36
#39
Originally Posted by sr20jet
Make the turn signals like the newer Mustangs, flashes from inner to outer.


That's pretty much what I had in mind. From what I've been reading though, the pattern you can use is nearly endless as far as choices.

Originally Posted by LIUSPEED
wow sounds awesome hurry up and figure this out for i want a set done


Just soldering and wiring the led's is easy. Now, as far as the the controllers and everything related to moving patterns, that's a different story. I still have some self-education to do before I can implement that. As soon as I can get a prototype I'm happy with, I'll make a "how to" thread for everyone. I could also piece together pre-fabbed kits for the DIY people, or maybe even work something out where I can sell finished units. Not sure yet. Just have to see how everything will pan out.
2011-11-15 11:39:45
#40
So after a little thought on how to do the red and white tail light lenses, it looks like the best way to do it is to cut and form a new piece of clear plastic. Not too sure where I would be able to source plastic that has the same diffuser pattern to match. Junkyard tail light housings maybe? Maybe I could (flame suit on) use the clear pieces from a Civic, like the picture posted on the first page? If they are about the same size, they could be formed to fit the 200SX lens. I'll keep looking for different plastic that has a diffuser pattern to match. The search continues......

As far as the LED part goes, I've started testing designs already, and have started a thread here:

200SX LED tail light conversion
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top