Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 5 lug conversion info help

+ Reply To Thread
Posts: 21-30 of 39
2011-04-22 08:04:16
#21
Okay here's the deal, I was mis-informed. Here's what I found out.

When I pulled the Spindles/Hubs off the B15, I just happen to pull them off the black sheep of the B15, the NON SE-R / SPEC-V, LE Version of the B15 with the QR25. I thought that ALL B15 Hubs were the same because it wasn't an SE-R or SPEC-V. Boy was I wrong.

5 Lugging a B13/14 is a lot easier knowing what I know, now. All you need for your GA16 B14 is B15 Hubs/Spindles from a NON-QR25 B15. You want them from a QG or SR B15 as they have the same hub splines as the B13/14. All you have to do is re-drill them for 5x114.3 and you can re-use your same GA axles! How simple is that? I wish I would have known this. B15 axles are a little longer then the B14 and can cause some issues.

You will be okay 5 lugging your GA.
2011-04-22 18:37:59
#22
Originally Posted by UNISA
B15 QG18DE/SR20DE hub/spindles = Compatable with B13/B14 axles

B15 QR25DE LE, SE-R, SE-R Spec V hub/spindles = Not compatable with B13/B14 axles


Originally Posted by javcrodgz
Okay here's the deal, I was mis-informed. Here's what I found out.

When I pulled the Spindles/Hubs off the B15, I just happen to pull them off the black sheep of the B15, the NON SE-R / SPEC-V, LE Version of the B15 with the QR25. I thought that ALL B15 Hubs were the same because it wasn't an SE-R or SPEC-V. Boy was I wrong.

5 Lugging a B13/14 is a lot easier knowing what I know, now. All you need for your GA16 B14 is B15 Hubs/Spindles from a NON-QR25 B15. You want them from a QG or SR B15 as they have the same hub splines as the B13/14. All you have to do is re-drill them for 5x114.3 and you can re-use your same GA axles! How simple is that? I wish I would have known this. B15 axles are a little longer then the B14 and can cause some issues.

You will be okay 5 lugging your GA.


WOW, this is great, thank a lot... this really helps and saves time
2011-04-22 21:08:34
#23
Originally Posted by javcrodgz
Okay here's the deal, I was mis-informed. Here's what I found out.

When I pulled the Spindles/Hubs off the B15, I just happen to pull them off the black sheep of the B15, the NON SE-R / SPEC-V, LE Version of the B15 with the QR25. I thought that ALL B15 Hubs were the same because it wasn't an SE-R or SPEC-V. Boy was I wrong.

5 Lugging a B13/14 is a lot easier knowing what I know, now. All you need for your GA16 B14 is B15 Hubs/Spindles from a NON-QR25 B15. You want them from a QG or SR B15 as they have the same hub splines as the B13/14. All you have to do is re-drill them for 5x114.3 and you can re-use your same GA axles! How simple is that? I wish I would have known this. B15 axles are a little longer then the B14 and can cause some issues.

You will be okay 5 lugging your GA.


You are talking about the rotors being re-drilled correct?
2011-04-22 21:21:59
#24
No Alex se r, he means you have to re-drill the hub to 5x114.3 because B15 are 4x114.3.

You might as well do a brake upgrade to your choice of maxima brakes while you are at it so you dont have to redill your rotors and the maxima calipers are 100% bolt on upgrade to the B15 spindle/hubs once the hubs are drilled to 5x114.3.
2011-04-22 22:09:48
#25
I knew I should've also said this to:

By now your probably thinking the hell with all that if im gonnA have to re-drill the B15 hubs wHy not just re-drill my stock hubs?

And here is your answer.

YOU CAN'T BECAUSE THEY ARE PHYSICALLY SMALLER AND YOU WOULD BE DRILLING INTO THE AIR LOL, PLAIN AND SIMPLE THERE ISN'T ENOUGH MATERIAL TO DRILL OUT A 5X114.3 BOLT PATTERN.
2011-04-22 22:39:24
#26
Heres another link that'll give you an idea on the redrilling, I sold my kit to this guy also, B15 guys does this quit often, they buy my 5 lug kit the most of all the chassis. Lets see more 5 lug B13 and B14 haha.

All B15 Models How to do the 5 lug conversion - B15U.com - Nissan Sentra Forum
2011-04-25 06:37:15
#27
now im on the hunt for the B15 QG spindles
2011-04-25 08:45:12
#28
now since im going to be using the B15 QG spindles what calipers can i used on the front????
2011-04-25 09:23:52
#29
Originally Posted by JR20DET
now since im going to be using the B15 QG spindles what calipers can i used on the front????


Maxima and Altima calipers.
2011-05-01 02:16:42
#30
sorry if im thread jacking but i figured i ask this since you guys are talkin about conversions. my buddy is parting out a 240, if i wanted to do a 4x114 conversion (i know i prob can use the parts of a p10, but this 240 is sittin in my garage might as well grab the parts) could i use s13 240 4x114 spindles and all the parts to convert my b14 to 4x114?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top