Axle and CV joint question about the 200sx SE-R and the Nissan Almers (N15 Pulsar)
Hi guys, I own a nissan almera with a SR20DE RR with 143 bhp.
So in germany it is nearly impossible to find axles and cv joint, one cv joint costs here at nissan 600€ and there are no reproductions are not available.
So my question, the b14 and the N15 are really similar to each other:
So the cv joint has the nissan
part nummer: 392110M306 alternate: 392112N560
Shaft front drive, left-hand part number: 3910140Y15
so this are the numbers which i get from nissan4u, So my question is do the b14 with an SR20DE use the same axles?
If it is so i would order some...
In Germany is the Problem, they think there are selling the right cv joints, but they are all from the 1,6 and 1,4 engine...
So in germany it is nearly impossible to find axles and cv joint, one cv joint costs here at nissan 600€ and there are no reproductions are not available.
So my question, the b14 and the N15 are really similar to each other:
So the cv joint has the nissan
part nummer: 392110M306 alternate: 392112N560
Shaft front drive, left-hand part number: 3910140Y15
so this are the numbers which i get from nissan4u, So my question is do the b14 with an SR20DE use the same axles?
If it is so i would order some...
In Germany is the Problem, they think there are selling the right cv joints, but they are all from the 1,6 and 1,4 engine...