Thread: Moral support request: changing the swaybar bushings.

Yo dudes.

So i got polyurethane sway bar end links and bushings to install..
But i don't know exactly the best way to go about removing and reinstalling the sway bar.

So theoretically i have the front end in the air.. do i have to lift the suspension/brake/axle to wheel assembly ( i don't know the word for it ) upwards on both sides? do i lift one side at a time? just remove the swaybar as is?

I ask this because i know the swaybar keeps things in place to some extent.

Also.. any trick to reinstalling the swaybar links?

thanks in advance.

just lift the front of the car up, take the wheels off, remove endlinks and replace, remove bushings and replace, nothing will pop out at you or anything

Super simple like AOL-sucks said. Let both sides droop equally and you'll be fine.

There is no tension on the factory sway bar.

Okie, thanks guys.

This is what I did.
http://www.sr20-forum.com/members-rides/28950-car-work-ive-been-doing.html