Thread: Clutch cable install?

FTW!!!!!!!

I already had it in by laying upside down in the seat.... That way made it pretty easy but leaves your head hurting haha

lol I have a feeling I'll be doing this someday on the side of a busy road w/everyone wondering wtf I'm doing

Lmao what a coincidence that's exactly how it happened to me.cable broke in new york city right by the 59 street bridge.after 4 hours of train time there and back I worked thru the night and had cops watchoin me for a good 3 hours unti they saw me pack up and hit the alarm. Then they drove off. Everyone else was lookin at me if eas attempting to boost the car lol.worked on that car from 3 am to 10 am with a flashlight

Also bro don't 4get to fill that cable up wit motorcyle chain grease before u ionstall it.if u did already it aint that bad lubon it wen its already in the car. Good luck!

wow, why did it take so long to replace the cable? I thought you just have to unhook it from the pedal and pull it through?

I wouldnt prefer prying on the fork because sh*t can go flying. You should be able to loosen the adjuster on the cable enough to slide it over the fork and then tighten it back up.

Myn I needed a pry bar. I need to do a clutch pp and to change wen it gets warmer.(don't like workin in this weather unless im gettin paid lol or have no choice)Also if you need to put a spacer in or using the 1.6 you might need a pry bar.reason y it took me so long I had to wait for home depot to open because I didn't have anything withe the good amount of leverage I needed since I didn't bring my prybar thinkin the same thing that I wouldn't need one.thank god I broke down a block away from one.tried everything I could until they opened.11 dollar stanley fat max wrecking bar worked wonders.pry bars slip when you put too much pressure or don't position properly.you position securely and give ot the right amount of pressure prybars are your best friend